Green JBL Control 88M

Jbl CONTROL88M

Features

Tough polyethylene enclosure Resists abuse from lawn care equipment and the elements

Quick Specs

Type: Speakers
Width: 355 mm (14 in)"
Height: 524 mm (20.7 in)"
Depth: 355 mm (14 in)"

See More

QTY

URL

Highly weather resistant

Perfect for outdoor use

360 degree coverage

Can be used in a wide variety of applications including hotels, casinos, pool areas, shopping malls, theme parks, sports venues, resorts, restaurants, hospitality and leisure venues, entranceways, and anywhere a high quality music and/or paging speaker landscape speaker is required.

Compact size

Allows the speaker to blend into landscaping and shrubbery

Highly weather resistant Perfect for outdoor use

360 degree coverage Can be used in a wide variety of applications including hotels, casinos, pool areas, shopping malls, theme parks, sports venues, resorts, restaurants, hospitality and leisure venues, entranceways, and anywhere a high quality music and/or paging speaker landscape speaker is required.

Compact size Allows the speaker to blend into landscaping and shrubbery

Features

Tough polyethylene enclosure Resists abuse from lawn care equipment and the elements

General Specifications
Frequency Response (-10dB)	47 Hz - 16 kHz
Power Rating	100W RMS
Transformer Taps	70V = 60W RMS, 30W RMS, 15W RMS & 7.5W RMS ; 100V = 60W RMS, 30W RMS, 15W RMS
Frequency Response (±3 dB)	60Hz - 15 kHz
Maximum Input Voltage	28.0 V
Sensitivity	87 dB, 1W @ 1m (ave. 80Hz - 16kHz)
Nominal Coverage Angle	360° horizontal, 160° vertical (primary listening 10° to 50° up from ground)
Directivity (Q)	2.1
Directivity Index (DI)	3.2 dB
Rated Maximum SPL	108 dB @ 1m
Nominal Impedance	8Ω (at 8Ω setting)
Minimum Impedance	6.6Ω at 9.5kHz
Insertion Loss	<0.5 dB at any tap setting
Thru Setting	8Ω nominal
Crossover Type	2nd Order LPF on LF and 2nd Order HPF on HF
Recommended Protective High-Pass	45 Hz for 8Ω operation, 24 dB/oct 80 Hz for 60W tap, 24 dB/oct 50 Hz for 30W, 7.5W, and 7.5W taps, 24 dB/oct
Low Frequency Driver	200 mm (8.00 in) diameter LF driver, Kapton™ former, 38mm (1.5 in) voice coil, polypropylene cone and polyurethane surround.
High Frequency Driver	25mm (1.0 in) diameter HF driver Polyetherimide (PEI) dome
Terminals	Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section)
Wiring	Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16" in and 0.35" in). For Installation instructions, see Installation Guide (#IS-C80MLS).
Included Accessories	(2) wire nuts, (2) gland nuts, (1) right-angle screwdriver
Installer-Supplied Required Tools	22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.
Dimensions
Height	524 mm (20.7 in)
Width	355 mm (14 in)
Depth	355 mm (14 in)
Net Weight	7.8 kg (17 lb)
Shipping Weight	10.5 kg (23 lb)
Design
Enclosure Material	LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.
Grille	Powder coated stainless steel.
Environmental	IP-55 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.
Agency Ratings	UL1480, Transformer UL Recognized per UL1876, ROHS compliant.

Quick Specs

Appearance
Type: Speakers
Width: 355 mm (14 in)"
Height: 524 mm (20.7 in)"
Depth: 355 mm (14 in)"

Spec Sheet (EN)

Get Adobe Reader

* Documents require Adobe Reader.

Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.

Extended warranties are usually very inexpensive and can save you thousands in the future. It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.

Electronics can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new electronics should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.